er602dc thru ER603DC dpak surface mount superfast rectifier voltage - 200 to 300 volts current - 6.0 amperes features l for surface mounted applications l low profile package l built - in strain relief l easy pick and place l superfast recovery tim es for high efficiency l plastic package has underwriters laboratory flammability classification 94v - o l glass passivated junction l high temperature soldering: 260 /10 seconds at terminals mechanical data case: d pak/to - 252aa molded plastic terminals: solder plated, solderable per mil - std - 750, method 2026 polarity: color bank denotes cathode standard packaging: 16mm tape (eia - 481) weight: 0.015 ounce, 0.4 gram maximum ratings and electrical characteristics ratings at 25 ambient temperature unless otherwise specified. resistive or inductive load. symbols er602dc ER603DC units maximum recurrent peak reverse voltage v rrm 200 300 volts maximum rms volta ge v rms 140 210 volts maximum dc blocking voltage v dc 200 300 volts maximum average forward rectified current, at t c =75 i (av) per diode 3.0 per device 6.0 amps peak forward surge current 8.3ms single half sine - wave superimposed on rated load(jedec method) i fsm 75.0 amps maximum instantaneous forward voltage at 3.0a (note 1) v f 0.95 1.25 volts maximum dc reverse current t a =25 at rated dc blocking voltage t a =100 i r 5.0 0.25 a ma maximum thermal resistance (note 2) r jc r ja 6.0 80.0 /w maxi mum reverse recovery t rr 35.0 n s storage temperature range t stg - 50 to +150 d pak/to - 252aa
notes: 1. pulse test with pw=300 sec, 2% duty cycle. 2. mounted on p.c.board with 14mm 2 (.013mm thick) copper pad areas. rating and characteristic curves er602dc thru ER603DC fig. 1 - reverse recovery time characteristic fig. 2 - maximum average forward and test circuit diagram current rating fig. 3 - typical revers e characteristics fig. 4 - typical forward capacitance fig. 5 - maximum non - repetitive surge current fig. 6 - typical junction capacitance
|
